Mahr Millimess 2001 Wi (metric)
Image may not correspond to reality
  • Mahr Millimess 2001 Wi (metric)

Millimess 2001 Wi (metric)

Inductive dial comparator
4346811
Mahr
€876.00 - €987.50

€1,051.20 - €1,185.00 tax incl.

Features
  • Unit of measurement METRIC only (no INCH)
  • Tempered glass front with touch control panels with enormous advantages:
    • scratch and impact resistant surface
    • excellent protection against dust, coolants and lubricants
    • wear-free touch operating keys
    • improved safety of measurement values in measuring stands, as only a light touch of the key
    • no keystroke - is required, thus no adjustment or deformation of the measuring device
  • Clear tolerance limits in the scale display and colored LED signals (red, green, yellow) for measured value classification
    • with warning limit input: No Go / Go / Warning Limit
    • without warning limit input: No Go / Go / Rework
  • LED signals (red, green, yellow) in mode:
    • powered by Accumulator: flashing signal (1 sec.)
    • powered by data cable DK-U1: permanent
  • High contrast LCD display, thus very clear and safe to read
  • Analog scale display for visual recognition of the measuring movement during dynamic measurment tasks such as checking of concentricity or flatness as well as for reversal point search during bore measurements
  • Operating and display unit (bezel) can be rotated through 280°
  • Mounting shank and measuring spindle are both made of hardened stainless steel
  • Measuring spindle is mounted in a high precision ball guide for minimal hysteresis
  • Linearized inductive absolute measuring system
  • Measuring force spring is interchangeable
  • Lower stop is adjustable
Reference Error limit (µm) Measuring force Repeatability (µm) Standard Calibration certificate Availability Price (tax excl.)
4346811 ± (0.2 + L/2)   L in mm0.9 ±0.1 N (at the electrical zero point)0.1 µmFactory standard in stock at the supplier €876.00
4346811KAL ± (0.2 + L/2)   L in mm0.9 ±0.1 N (at the electrical zero point)0.1 µmFactory standardMahr Factory in stock at the supplier €910.25
4346811DKS ± (0.2 + L/2)   L in mm0.9 ±0.1 N (at the electrical zero point)0.1 µmFactory standardDAkkS in stock at the supplier €987.50

Product Details

Function
(MAX-MIN) for testing flatness and concentricity
0 (set the analog scale display to zero)
ABS (reference to the electrical zero point)
Bi-directional data interface (external output and input option of characteristic values as well as setting of individual lock functions by software MarCom)
DATA (data transmission)
Factor (adjustable)
HOLD (storage of measured values)
LOCK function (key lock)
MAX/MIN memory for searching the reversal point
ON/OFF
PRESET (for entering a numerical value)
RANGE (switch the measuring range and resolution)
RESET (set display to zero)
Reversal of counting direction
Selectable resolution
TOL (Tolerance and Warning Limits Input)
Data interface
Digimatic
Integrated Wireless
USB
Energy supply
Integrated rechargeable accumulator (up to 4 weeks) or powered by USB Data Cable
Height of digits
9 mm
IP protection category
IP 64
Package contains
Cardboard box
Plug-in power supply (with 4 interchangeable adapters) for USB
Screwdriver for pre-stroke adjustment (hexagon socket 0.9 mm)
USB data and charging cable type DK-U1
instruction manual
rubber bellows
test certificate
Resolution (mm)
0.0001
0.0002
0.0005
0.001
0.002
0.005
0.01
Hysteresis error of the measured value (µm)
0.3 µm
Overtravel (mm)
2.5 mm
Range of analog display (mm)
± 0,004
± 0,01
± 0,02
± 0,04
± 0,1
± 0,2
± 0.002
Measuring range, test indicator, comparator, probe
± 1
Measuring range beginning (mm)
-1 mm
Measuring range end (mm)
1 mm
Supply voltage
100-240 V